Description
10″ Marine Loaded Subwoofer Enclosure
With Passive Radiator
RMS Power: 350 Watts
Impedance: 4 Ohm
RGB LED Lights ~ Ferrite Magnet
Water Resistant IP65
$599.95
NXL-10SUBLD/BK
Aisle 8
NXL-10SUBLD/BK
Aisle 8
Additional information
| Product Color | Black, White |
|---|
MOUNTING
1. Determine where the Subwoofer Box will be mounted. Ensure an area large
enough for the Box to mount evenly. Only mount to flat surface.
2. Mark the locations for the mounting screws. Drill the hole with a 13/64 bit.
3. Feed the speaker wire through the cutout and connect to the speaker terminals.
Be sure to observe proper polarity when connecting the wires. The speaker’s
positive terminal is indicated with a “+”.
4. Fit the Subwoofer Box and mount into place using four (4) screw supplied.
5. Tighten the screws until the Box is snug in place.
1. Determine where the Subwoofer Box will be mounted. Ensure an area large
enough for the Box to mount evenly. Only mount to flat surface.
2. Mark the locations for the mounting screws. Drill the hole with a 13/64 bit.
3. Feed the speaker wire through the cutout and connect to the speaker terminals.
Be sure to observe proper polarity when connecting the wires. The speaker’s
positive terminal is indicated with a “+”.
4. Fit the Subwoofer Box and mount into place using four (4) screw supplied.
5. Tighten the screws until the Box is snug in place.
10" Marine Loaded Subwoofer Enclosure With Passive Radiator RMS Power: 350 Watts Impedance: 4 Ohm RGB LED Lights ~ Ferrite Magnet Water Resistant IP65
| Product Color | Black, White |
|---|
MOUNTING 1. Determine where the Subwoofer Box will be mounted. Ensure an area large enough for the Box to mount evenly. Only mount to flat surface. 2. Mark the locations for the mounting screws. Drill the hole with a 13/64 bit. 3. Feed the speaker wire through the cutout and connect to the speaker terminals. Be sure to observe proper polarity when connecting the wires. The speaker’s positive terminal is indicated with a “+”. 4. Fit the Subwoofer Box and mount into place using four (4) screw supplied. 5. Tighten the screws until the Box is snug in place.
Reviews
There are no reviews yet
Related products
-
MB QUART Subwoofer Kit
$649.99 Select options This product has multiple variants. The options may be chosen on the product page -
MB QUART Subwoofer Kit
$600.00 Select options This product has multiple variants. The options may be chosen on the product page -
NXL 12″ Subwoofer With LED RGB Lights
$339.95 Select options This product has multiple variants. The options may be chosen on the product page -
NXL 10″ Subwoofer With LED RGB Lights
$239.95 Select options This product has multiple variants. The options may be chosen on the product page
Reviews
There are no reviews yet